Renegade® Viper Hoof Boot

The Renegade® – Viper® Hoof Boot is the next generation horse boot paying homage to its predecessor, the Renegade® – Classic Hoof Boot. While incorporating the same competition proven pivoting heel captivator design, cabling system, and straps as the Renegade® – Classic Hoof Boot, the Renegade® – Viper® Hoof Boot features many new upgrades. First, with a sleek new look and available in two bright new colors, Comet Orange and Emerald Green, the Renegade® – Viper® is sure to turn heads. The tread really displays the artistic talent of the Viper’s® designer, Kirt Lander, while showing off its aggressive side where it counts. With deeper grooves for longer lasting tread, and an unforgiving look, the Viper® tread will bite the ground better than any other hoof boot that came before.

Renegade Viper Horse Boot
Renegade Viper Hoof Boots

The Viper® has been trimmed down, removing material using finite element analysis, resulting in a hoof boot that is, despite the more robust tread, about 15{1182722b1005f37ab14ce3affa3afb559a7bdde7ba89d7818ce9d1f2c5f827fb} lighter than the Classic, and with more lateral clearance on both the Boot Shell and the Heel Captivator. A deeper Heel Captivator “gullet” allows for improved pastern bone clearance. The material used to make the Viper® is a new, ultra durable polyurethane resulting in a much longer lasting boot. The inside of the boot is texturized and the Heel Captivator Liner is bonded in place, both for more stability en route.

The Viper® logo and boot size are stamped very large inside of each boot for quick and easy size readability. The sizing scheme for the Viper® uses the metric system while also conforming to the industry standard length first then width format. For simplicity, there will be no extra size designation other than the given size’s dimensions, e.g., a boot that is 135 mm long and 125 mm wide will have size designation 135×125.

Sizing

The Renegade® – Viper® Hoof Boot uses its own unique sizing chart and schematic.Sizing is not the same as the Renegade® – Classic Hoof Boot.

To properly measure and size the Renegade® – Viper® Hoof Boot, take your horse’s hoof measurements (on a freshly-trimmed hoof), preferably in millimeters. If you do not have a millimeter ruler, use the converter tool below to convert the inch measurement to millimeters.

The boot shell should not fit tightly.
To determine the proper boot size, add a minimum of 5mm up to a maximum of 10mm to the horse’s length and width measurements, and find the closest boot size in the chart below.

Please note that modifications of the boot shell, such as cutbacks on the length, are not offered on the Renegade® – Viper® Hoof Boot.

Sizing in Millimeters

Boot Size
(Length x Width)
Boot Length Measurement Boot Width Measurement
120×110 120mm 110mm
125×115 125mm 115mm
125×120 125mm 120mm
125×125 125mm 125mm
130×120 130mm 120mm
135×125 135mm 125mm
135×130 135mm 130mm
135×135 135mm 135mm
140×130 140mm 130mm
140×135 140mm 135mm
140×140 140mm 140mm
145×145 145mm 145mm
150×150 150mm 150mm

If you have a question as to the best size for your horse, please email photos of your horses hooves with a tape measure showing the length and width to support@renegadehoofboots.com.

Hoof Width: Measured at the widest point of the hoof.

Hoof Width: This measurement is taken at the widest point of the hoof, which should be at roughly the middle of the hoof. A very triangular or “spade” shaped hoof, in which the toe is narrow and pointy and the heels are the widest part of the hoof, may not be a good candidate for the shape of the Renegade® – Viper®Hoof Boot shell.

how to measure for hoof boots

Hoof Length: This measurement is taken from the toe back to the rearmost weight-bearing part of the hoof that makes ground contact. Make sure this measurement is being taken back far enough; it is common for a length measurement to be taken too short, and the subsequent measurements will then seem to suggest a hoof that is wider than long. The hoof shape should be symetrical or slightly oval; a hoof that is wider than long is often the result of excess flare on the hoof wall and should be addressed before a successful boot fit can be obtained. A hoof that is wider than long may not be the best candidate for the Renegade® – Viper® Hoof Boot.

Colors

Cosmic Orange
Cosmic Orange
Renegade Viper Horse Boot
Emerald Green
Dragonfire Red
Dragonfire Red
Arizona Copper
Arizona Copper
Black Knight Hoof Boot
Black Knight

Performance

Renegade® – Viper® Hoof Boots have been proven over thousands of miles in equine endurance riding alone, including successful finishes at some of the most demanding competitions the sport has to offer such as the Western States Trail “Tevis Cup” 100-Miles-One-Day endurance ride that traverses the Sierra Nevada mountains from Lake Tahoe to Auburn, CA, and the Big Horn 100-mile endurance ride in the rugged Big Horn mountains of Wyoming.